ADT® Authorized Dealer Serving Scottsdale & The Surrounding Area
Carbon monoxide detector attached to wall of home
January 08, 2024

Where To Place Carbon Monoxide Detectors In Your Scottsdale Home

Homeowners must safeguard against a variety of risks like burglary, fire, and flooding. But what about a risk that can’t be detected by human senses? Carbon monoxide poses a unique challenge as you might never realize it’s there. Despite that, implementing CO detectors can effectively protect you and your household. Find out more about this dangerous gas and where to place carbon monoxide detectors in your Scottsdale property.

What Is Carbon Monoxide?

Called the silent killer due to its absence of odor, color, and taste, carbon monoxide is a commonly found gas produced by the incomplete combustion of fuels. Any appliance that utilizes fuels like a fireplace or furnace may produce carbon monoxide. Although you typically won’t have a problem, complications can present when equipment is not frequently inspected or adequately vented. These mistakes may result in an accumulation of this dangerous gas in your residence. Generators and heating appliances are the most consistent reasons for CO poisoning.

When in contact with low levels of CO, you may experience fatigue, headaches, dizziness nausea, or vomiting. Prolonged exposure to high concentrations can lead to cardiopulmonary arrest, and even death.

Tips For Where To Place Scottsdale Carbon Monoxide Detectors

If you don’t own at least one carbon monoxide detector in your interior, purchase one today. If possible, you should use one on every level of your home, including basements. Browse these recommendations on where to place carbon monoxide detectors in Scottsdale:

  • Place them on each floor, particularly in areas where you utilize fuel-burning appliances, including furnaces, gas dryers, fireplaces, and water heaters.
  • Always install one no more than 10 feet away from bedroom areas. If you only install one carbon monoxide detector, this is the place for it.
  • Position them approximately 10 to 20 feet away from potential CO sources.
  • Do not affix them directly beside or above fuel-utilizing appliances, as a little carbon monoxide may be released when they kick on and prompt a false alarm.
  • Attach them to walls about five feet from the ground so they can measure air where inhabitants are breathing it.
  • Avoid using them in dead-air areas and next to windows or doors.
  • Put one in areas above garages.

Inspect your CO detectors routinely and maintain them per manufacturer recommendations. You will typically need to replace them in six years or less. You should also make sure any fuel-burning appliances are in in optimal working shape and appropriately vented.